Troubleshooting and lawnmower repair

Stop the engine and start the Garage Repair

Lawnmower repair must be done actually by specialist in lawn mowers. But we can find out the problem by knowing the parts or the most common failures that lawn mowers can have. Before attempting any lawnmower repair, please be sure that you switch off the engine and disconnect spark plug.

General troubleshooting

Lawn mower repair can solve problems in engines when the engine stops when the blades are engaged, the possible causes could be either an not suitable operator seated or bad connection at the seat switch. It could be also a faulty seat switch or damaged wiring harness. Easy reparation can be made by the operator, sitting all the way back in the seat. Make sure the seat switch is firmly connected to the harness, replacing the seat switch or replacing the wiring harness .

Another common failure and therefore need lawn mower reparation is when grass does not discharge correctly. This common error can happens when the following situations come: Grass too wet or too tall, Ground speed too fast , debris build up under mower housing, worn or dull blades, bent or damaged blades. They can also be avoid or repaired by not cutting wet or excessively tall grass, reducing ground speed, Clean underside of mower housing, Sharpening or replacing blades.

Last common failure for us could be that the mower housing does not cut level. It can be produced when there is inconsistent tires pressure, Unleveled mower housing , Worn or dull blades or maybe Bent or damaged blades.In the other hand they can be avoided by making sure that tires pressure is correct, having a level mower housing, again and always sharpening or replacing blades. All above tips are highly recommended when lawn mowers complain with these specific fails. Although tips can solve the problem, always check to local dealers or technician when lawnmower repair is needed.